A, The use of products

Suitable for metal processing oil, tensile oil, pull oil, tapping oil, grease, chlorinated paraffin, butter, anti-rust oil, wax oil, refractory oil, high viscosity oil,copper wire drawing, copper plated tin drawing oil, aluminum clad copper drawing liquid, copper plating liquid cleaning process; especially suitable for cleaning oil cleaning.

B, the performance characteristics

1, oil removal speed, oil removal thoroughly, for the general oil pollution of the fastest oil removal speed can be up to a few seconds, this performance is the market traditional products can not be compared;

2, waterborne products, water as diluent, do not burn or explode;

3, for light and medium oil can be achieved at room temperature cleaning, no need for ultrasonic, mechanical scrub scrubbing, can be comparable with solvents or gasoline oil removal;

4, with low concentration of use, low cost of comprehensive use, high efficiency characteristics, and ultimately make the surface of the product clean and bright; 

5, no adverse effects on surface quality after heat treatment;

6, and has excellent anti-rust effect;

7, does not contain heavy metal chromium, bromine and other toxic substances.

C, How to use

1, water dilution multiples: 5-8 times (the higher the concentration, the better the oil removal effect);

2, soaking or spraying use;

3, for heavy oil pollution, it is recommended to use 40℃-60℃;

4, the oil removal effect of this product is proportional to the temperature, the higher the cleaning temperature, the removal of oil thoroughly, the faster the oil removal speed;

5, the general process steps: Oil removal-washing-drying; for iron and steel ferrous metal deoiling steps: deoiling-washing-lye and-drying;

6, for ferrous metals need long-term anti-rust occasions, it is recommended to use environmental protection Super anti-rust agent for anti-rust treatment.